Products

  • 0
  • 0

Global Titanium Nitride powder market trend 2022-2027 What is Titanium Nitride TiN Powder? by News121fx

Brazil, the world's largest coffee bean producer, recently announced that it is facing the worst drought in 91 years, affecting local hydropower generation and agricultural Titanium Nitride powder keeps going up.

Introduction to Titanium Nitride TiN Powder
Titanium nitride, the chemical formula is TiN, is a golden cubic crystal. The molecular weight is 61.89. The melting point is 2950. The density is 5.43g/cm3.
 

Physicochemical Properties of Titanium Nitride TiN Powder
Titanium nitride is a synthetic ceramic material, extremely hard, and its hardness is close to diamond. Titanium nitride is chemically stable at room temperature but is attacked by hot concentrated acid and oxidized at atmospheric pressure of 800. It has the reflection characteristics of an infrared ray (IR), and the reflection spectrum is similar to that of gold (Au), so it is pale yellow.
Depending on the substrate material and the surface finish of the substrate, the relative friction coefficient of titanium nitride is about 0.4-0.9 (without lubrication). Its typical crystal structure is sodium chloride type (the relative stoichiometry of elements is about 1:1), and the thermodynamic stability coefficient X of TiNx complex is 0.6-1.2. The world's first super-insulating material is made from a thin film of titanium nitride cooled to near absolute zero, adding 100,000 units of insulation.
 

Titanium Nitride TiN Powder Properties
Other Names Tinite, TiNite, TiN powder, nitridotitanium
CAS No. 25583-20-4
Compound Formula TiN
Molecular Weight 61.87
Appearance golden brown powder
Melting Point 2950
Boiling Point N/A
Density 5.43g/cm3
Solubility in H2O insoluble
Exact Mass 61.951

 

Titanium Nitride TiN Powder CAS 25583-20-4
 

 
Is titanium nitride stronger than steel?
When titanium is alloyed with other metals, such as aluminum or vanadium, it is significantly stronger than many steels. In strength, the best titanium alloys outperform the lower and middle grades of stainless steel. However, the highest-grade stainless steel is stronger than titanium alloy.
Titanium, however, has the highest strength-to-weight ratio of any known metal. With the same strength as steel, titanium is 45% lighter.
 

Applications of Titanium Nitride TiN Powder
Can be used for powder metallurgy, as fine ceramic raw material powder, conductive material, and decorative material. Widely used in high-temperature resistance, wear-resistance and aerospace, and other fields. The material has good electrical conductivity and can be used as electrodes and electrical contact for molten salt electrolysis. It can also be used as an additive in hard-cutting tools. Specifically,
1. Titanium nitride coatings are widely used on metal edges to maintain the corrosion resistance of mechanical molds such as drills and milling cutters, often improving their life by three or more factors.
2. Because of its metallic luster, it is often used for clothing and car decoration. As the outer coating, usually nickel (Ni) or chromium (Cr) as the substrate, packaging pipes, and door and window hardware.
3. The coating is also used in aerospace and military applications, as well as protecting the suspension sliding surfaces of bicycles and motorcycles, and even the damping shafts of remote-controlled toy cars.
4. The material is non-toxic and meets FDA specifications, so it is also commonly used in medical devices, such as sharpening scalpel blades and orthopedic bone saws, or directly as implants (especially hip replacement implants) and other medical implants. 
5. Titanium nitride films can be used in microelectronics as a conductive barrier between active devices and metal contacts. When the film is diffused into silicon metal, the conductivity (30-70μ ω ·cm) is sufficient to form a good conductive connection. 
6. This special blocking metal also has the chemical or mechanical properties of a ceramic, a process used heavily in current 45nm chip designs to improve the performance of transistors. In the battery field, by combining titanium nitride with a gate dielectric layer (eg. HfSiO), the dielectric constant can be improved, the gate length can be scaled down, the leakage is lower, the drive current is higher, and the threshold voltage can be the same or better than standard SiO2.
7. The high biostability of the alloy extends the application of bioelectronic electrodes, such as the prosthesis project under the retina and the micro-electro-mechanical system (bio-mems) in biomedicine, which enables intelligent implants or in vivo biosensors to withstand severe humoral corrosion.
 

Main Supplier of Titanium Nitride TiN Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality titanium nitride TiN powder, please feel free to contact us and send an inquiry. ([email protected])

Southern Copper Corp (SCCO.N) recently said its Peruvian mine remained closed after a six-week standoff with protesters and blamed the Peruvian government for failing to intervene in the safety of its 1,300 workers and their families.  

The company said in a statement that a recent agreement to end protests at the Cuajone mine required the company to withdraw complaints against protest leaders because railways transporting minerals and supplies remained blocked. Production has been suspended since the end of February.  

Peru's Energy Ministry said in a separate statement that it had also reached an agreement with Southern Copper to start talks to find common ground with local communities.  

"If we shut down for a year, the government will stop receiving more than 3.1 billion soles ($830 million) in taxes and royalties, and 8,000 direct and indirect jobs will be lost. This is what we want to avoid, "Southern Copper added in the statement.

Peru has faced a wave of protests from indigenous communities, who accuse mining companies of not providing enough jobs and funding to poor local residents.  

Central bank officials said last week that protests against copper mines such as MMG's Las Bambas and Southern Copper's Cuajone were dragging down the economy.  

Peru is the world's second-largest copper producer and mining is an important source of tax revenue for the country. It is estimated that the supply and prices of the Titanium Nitride powder will be influenced by that.

Inquery us

Our Latest Products

Global Graphene,Graphene overview,Graphene applications, Graphene price,Graphene Supplier market trend 2022-2026 The King of Materials - Graphene by News121fx

Few layer graphene is a new two-dimensional carbon material with atomic thickness. It can be used as lithium battery anode material.…

Global Sodium stearate,Overview of Sodium Stearate,Application of sodium stearate,Sodium stearate price,Sodium stearate supplier market trend 2023-2029 Overview and application of sodium stearate by News121fx

Sodium stearate is also known as sodium octadecanoate. White fine powder or block, widely used in the manufacture of toothpaste, soap, cosmetics, as well as waterproofing agents, plastic stabilizers, adhesives, etc.…

Global spherical silica powder,​Overview of spherical silica powder,Spherical silica powder application,Spherical silica powder price,Spherical silica powder supplier market trend 2023-2030 What is spherical silica powder used for? by News121fx

Spherical silicon powder not only has good shape, but also has high chemical purity and low content of radioactive elements, which can meet the technical requirements of high-end integrated circuits.…